Nilfisk-alto E 140.2 Instrukcja Użytkownika

Nilfi sk E 130.2, E 140.2User Manual

115.2 Typical fi elds of applicationBelow you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfi sk

126 After using your pressure washer6.2 Winding up of electric cable and high pressure hose carefully up.1. Wind up the electric cable on the app

13WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, ple

148 Trouble-shootingTo avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk service organization:Symptom Ca

159 Further information9.1 Recycling the washer Make the old cleaner unusable immediately.1. Unplug the cleaner and cut the electric cable.Do not dis

169.3 AccessoriesOnly use original accessories.Click & CleanCar nozzle Special nozzle for enameled surfaces. Optimal distance: 30 - 50 cm.Click &a

17EU Declaration of ConformityProduct:High Pressure WasherType:Nilfi sk E 130.2, E 140.2Description:230 V 1~, 50 Hz - IP X5The design of the unit corre

128303203 a (02.2008)Nilfi sk, Division of Nilfi sk-Advance A/S, Industrivej 1, DK - 9560 Hadsund, tel.: (+45) 7218 2100

3Index 1 Safety precautions and warnings ...3 2 Description ...

4Extension cables should be of a watertight construction and comply with the below-men-tioned requirements for length and cable dimensions. 1.0 mm²

52.2 Operation elements and model surveySee illustration at the end of this manual. 1 Start/stop switch 2 Water inlet (with fi lter) 3 High pressu

63.3 Mounting of quick coupling1. Screw the quick coupling (16)tight on to the water inlet (2).Note: The inlet fi lter must al-ways be fi tted in the

74.2 Mounting of spray lance and Click & Clean nozzles2. Attach the nozzle. Warning: When attaching the Click & Clean nozzles, the pawl

84.5 Start and stop of the ma-chine (when connected to a water supply)The spray lance is affected by a thrust during opera-tion - therefore always ho

94.7 Pressure regulation on the TORNADO® PR- nozzleThe pressure can be regulated on the TORNADO® PR nozzle.4.8 Stationary use If mounting a special

105 Fields of application and working methods5.1 General Effi cient high presure cleaning is achieved by following a few guide-lines, combined wi